Code: E003-0000
Description: Abnormal low temperature of Fixing Assembly
Causes: After the heater is turned on, the detected temperature of the thermistor is 100 deg C or lower at the time of printing after reaching 50 deg C. • After the heater is turned on, the detected temperature of the thermistor is 55 deg C or lower at paper intervals or in cleaning mode after reaching 50 deg C.
Remedy: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedy. 1. Check connectors on the fixing unit. 2. Replace the fixing unit. 3. Replace the engine controller PCB.