Code: H3 00, H3 HL1
Description: Fusing section high temperature trouble. The fusing temperature exceeds 242°C. (An input voltage of 0.27V or above is detected.)
Causes: thermistor trouble Control PWB trouble Fusing section connector disconnection AC power trouble
Remedy: Use DIAG (SIM5-2) to check the heater lamp Blinking operation. If the heater lamp blinks normally: Check the thermistor and its harness. Check the thermistor input circuit in the control PWB. If the heater lamp keep lighting: Check the AC PWB and the lamp control circuit in the control PWB. Use DIAG (SIM14) to cancel the trouble