Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C18 — Sharp AR650

Code: C18

Description: Abnormal tandem LCF tray-up motor (Paper can be fed from cassettes other than the tandem LCF cassette.)
Remedy: Does the tray move? (Perform the output check in the test mode: 03-270) NO 1. Check if the connector of the tandem LCF tray-up motor is disconnected. 2 Check if the connector J346 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the LGC board. YES Are the LCF tray bottom sensor and LCF tray-up sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[4]/[C], /[8]/[A] NO 1. Check if the connectors of the sensors are disconnected. 2. Check if the connector J312 on the LGC board is disconnected. 3. Check if the slit reaches the sensors. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor pattern on the LGC board is short- or open-circuited. 6. Replace the LGC board. YES 1. Check if the driving mechanism is abnormal. 2. Check if the conductor pattern on the LGC board is short- or open-circuited. 3. Replace the LGC board.

← Xem tất cả mã lỗi Sharp AR650

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie