Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E3F — Sharp AR650

Code: E3F

Description: Paper fed from the tandem LCF (not reaching the tandem LCF transport sensor)
Remedy: Open the feed cover. Is there paper in front of the tandem LCF transport sensor? YES Remove the paper. NO Is the tandem LCF transport sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[4]/[B]) NO 1. Check if the connector of the tandem LCF transport sensor is disconnected. 2. Check if the connector J328, 350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the tandem LCF transport sensor. 6. Replace the LGC board. YES Are the transport clutches working? (Perform the output check in the test mode: 03-225) NO 1. Check if the connectors of the transport clutches are disconnected. 2. Check if the connector J328, 350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the transport clutches. 6. Replace the LGC board. YES Check the transport roller. Replace it if it is worn out.

← Xem tất cả mã lỗi Sharp AR650

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie