Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E55 — Sharp AR650

Code: E55

Description: Paper remaining on the transport path when CRUN is OFF
Remedy: Open the cover of the unit/area whose picture is flashing on the control panel. Is there any paper on the transport path? YES Remove the paper. NO Is the sensor in the jamming area working? (Perform the input check in the test mode: refer to the following table) NO 1. Check if the connector of the sensor is disconnected. 2. Check if any of the connectors on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the sensor. 6. Replace the LGC board. YES Replace the LGC board.
Registration area Registration sensor 03-[ENERGY SAVER]ON/[4][E] Exit/Reverse area Exit sensor 03-[ENERGY SAVER]OFF/[6][G] Reversel sensor 1 03-[ENERGY SAVER]OFF/[6][C] Reversel sensor 2 03-[ENERGY SAVER]OFF/[6][B] Reverse transport Transport sensor 1 03-[ENERGY SAVER]OFF/[0][C] area Transport sensor 2 03-[ENERGY SAVER]OFF/[0][A] Transport sensor 3 03-[ENERGY SAVER]OFF/[0][B] Paper feeding 1st cassette feed sensor 03-[ENERGY SAVER]OFF/[2][A] area 2nd cassette feed sensor 03-[ENERGY SAVER]OFF/[3][A] 3rd cassette/Tandem LCF feed sensor 03-[ENERGY SAVER]OFF/[4][A] 4th cassette/Tandem LCF feed sensor 03-[ENERGY SAVER]OFF/[5][A] 1st cassette transport sensor 03-[ENERGY SAVER]OFF/[2][B] 2nd cassette transport sensor 03-[ENERGY SAVER]OFF/[3][B] 3rd cassette/Tandem LCF transport 03-[ENERGY SAVER]OFF/[4][B] sensor 4th cassette/Tandem LCF transport 03-[ENERGY SAVER]OFF/[5][B] sensor

← Xem tất cả mã lỗi Sharp AR650

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie