Description: Finisher communication trouble (Machine detection)
Causes: Communication line test error when turning on the power or after canceling the exclusive simulation. Communication error with the finisher.
Remedy: Case 1 Cause Disconnection of the PCUfinisher connector, defective contact or disconnection of the harness. Check & Remedy Check the connector and the harness of the communication line. Case 2 Cause Finisher control PWB trouble Check & Remedy Replace the finisher control PWB. Case 3 Cause Control PWB (PCU) trouble Check & Remedy Replace the PCU PWB. Case 4 Cause Malfunctions by noises Check & Remedy — Common Cancel method Can be canceled by turning OFF/ON the power.