Code: L3 0
Description: Scanner return trouble
Causes: Scanner feed is not completed within the specified time. (The scanner home position sensor (MHPS) does not turn OFF within the specified time after outputting the scanner motor ON (feeding start) signal.)
Remedy: Case 1 Trouble position/cause Scanner home position sensor (MHPS) trouble Remedy (Check) Check the scanner home position sensor (MHPS) operation. (SIM 1-1/1-2) (Repair) Replace the scanner home position sensor (MHPS). / Power Source-ON (After-work) Note Case 2 Trouble position/cause Scanner motor trouble / Scanner motor control PWB trouble Remedy (Check) Check the scanner motor. / Check the scanner motor control PWB. (SIM 1-1) (Repair) Replace the scanner motor. / Replace the scanner motor control PWB. / Power Source-ON (After-work) Note Case 3 Trouble position/cause Scanner mechanism section trouble Remedy (Check) Check the scanner mechanism section. (Repair) "Repair the scanner mechanism section (scanner driver wire, drive pulley, etc.)." / Power Source-ON (After-work) Note Case 4 Trouble position/cause PCU MAIN PWB trouble Remedy (Check) (Repair) Replace the PCU MAIN PWB. / Power Source-ON (After-work) Re-enter setup values and adjustment values. (Install the EEPROM of the defective PCU MAIN PWB to a new PCU MAIN PWB.)