Code: U0 80
Description: PCU MAIN PWB - PCU SUB PWB communication trouble (PCU detection)
Causes: "Communication (protocol, data) error"
Remedy: Case 1 Trouble position/cause Bad connection of the signal line between the PCUMAIN PWB and the PCU SUB PWB. Remedy (Check) Check connection of the signal line between the PCU MAIN PWB and the PCU SUB PWB. (Repair) Repair or replace the cable and the connector of the PCU MAIN PWB and the PCU SUB PWB. / Power Source-ON (After-work) Note Case 2 Trouble position/cause PCU MAIN PWB trouble Remedy (Check) (Repair) Replace the PCU MAIN PWB. / Power Source-ON (After-work) Re-enter setup values and adjustment values. (Install the EEPROM of the defective PCU MAIN PWB to a new PCU MAIN PWB.) Note Case 3 Trouble position/cause PCU SUB PWB trouble Remedy (Check) (Repair) PCU SUB PWB replacement / Power Source-ON