Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi F2 84 — Sharp ARC170M

Code: F2 84

Description: Half-tone process control 2nd patch error (Black)
Causes: 2nd step of execution of half-tone process control. When connecting the approximation formula (the relationship of sensor output ratios for the print gradation values) in the lowdensity section and that in the high-density section obtained from the patch print result, DUTY1 for 20% of output ratio in the lowdensity section is greater than DUTY2 for 25% of output ratio in the highdensity section. <The trouble is saved in the trouble history, but F2 trouble is not displayed. The operation is made with the previous correction value.>
Remedy: Common Check Use SIM 44-2 to adjust the process control sensor gain. Case 1 Cause When "Error" occurs in the gain adjustment of SIM 44- 2: 1. Disconnection of the harness between the PCU PWB and the image density sensor. 2. Image density sensor dirt/trouble Check & Remedy 1. Check connection of the harness between the PCU PWB and the image density sensor. 2. Clean/replace the image density sensor. Case 2 Cause When SIM 44-2 gain adjustment is completed: Insufficient cleaning of the transfer belt, calibration plate solenoid operation trouble Check & Remedy Check the drum surface and the belt surface.

← Xem tất cả mã lỗi Sharp ARC170M

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie