Causes: • The encoder input value does not change in 0.13sec (first time)/0.5sec (second time or later) after rotation of the motor. • The motor is rotated for 18sec or more. • The encoder changes after the specified time from termination of the motor. (2sec and 10 counts or more)
Remedy: Common Check Use SIM 4-2 and 4-3 to check the sensor operation and the lift motor operation. Cancel the trouble with SIM 15. Case 1 Cause Sensor trouble Check & Remedy Replace the sensor. Case 2 Cause LCC control PWB trouble Check & Remedy Replace the LCC control PWB. Case 3 Cause Gear breakage Check & Remedy Replace the gear. Case 4 Cause Lift motor trouble Check & Remedy Replace the lift motor.