Causes: The encoder pulse is not detected for 50ms or more when the fusing motor is ON.
Remedy: Case 1 Trouble position/cause Fusing motor trouble Remedy (Check) Check the fusing motor operation.(SIM 6-1) (Repair) Replace the fusing motor. / Power Source-ON (After-work) Note Case 2 Trouble position/cause PCU SUB PWB trouble Remedy (Check) (Repair) PCU SUB PWB replacement / Power Source-ON (After-work) Note Case 3 Trouble position/cause Fusing mechanism section trouble Remedy (Check) Check the loads of the fusing mechanism section. (Repair) Repair or replace the parts in the fusing mechanism section. / Power Source-ON