Code: F1 91
Description: Bin paper sensor automatic adjustment trouble
Causes: Sensor output abnormality when adjusting the sensor detection level.
Remedy: Common Check Execute SIM 3-2 to check the sensor output. Case 1 Cause Cable trouble between the sorter controller PWB and the bin unit. Check & Remedy Check and connect the cable properly between the sorter controller PWB and the bin unit. Case 2 Cause Cable trouble on the light emitting side (S1) and the light receiving side (S2) of the bin paper sensor. Check & Remedy Check and connect the cable properly on the light emitting side (S1) and the light receiving side (S2) of the bin paper sensor. Case 3 Cause Improper installation on the light emitting side (S1) and the light receiving side (S2) of the bin paper sensor. Check & Remedy Install the light emitting side (S1) and the light receiving side (S2) of the bin paper sensor of the bin paper sensor, and perform the bin paper sensor sensitivity adjustment. Case 4 Cause Bin paper sensor light emitting side (S1) and light receiving side (S2) trouble Check & Remedy Replace the bin paper sensor light emitting side (S1) and light receiving side (S2), and perform the bin paper sensor sensitivity adjustment.