Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi L4 06 — Sharp ARC262

Code: L4 06

Description: Transfer belt lift motor trouble
Causes: When the belt motor lifts up or down, the change in the belt home position sensor characteristics is not detected within the specified time. (When the motor lifts up, the lower limit sensor remains ON after the specified time.) (When the motor lifts down, the lower limit sensor does not turn on after the specified time.)
Remedy: Case 1 Cause Belt lift motor trouble, disconnection of the harness between the PCU PWB and the belt lift motor, control circuit trouble Check & Remedy Use SIM 6-1 to check the belt lift motor operation. Check the harness and the connector between the PCU PWB and the belt lift motor.

← Xem tất cả mã lỗi Sharp ARC262

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie