Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi L1 0 — Sharp ARC280

Code: L1 0

Description: Scanner feed trouble
Causes: Scanner feed is not completed within the specified time. (The scanner home position sensor (MHPS) does not turn OFF within the specified time after outputting the scanner motor ON (feeding start) signal.)
Remedy: Case 1 Trouble position/cause Scanner home position sensor (MHPS) trouble Remedy (Check) Check the scanner home position sensor (MHPS) operation. (SIM 1-1/1-2) (Repair) Replace the scanner home position sensor (MHPS). / Power Source-ON (After-work) Note Case 2 Trouble position/cause Scanner motor trouble / Scanner motor control PWB trouble Remedy (Check) Check the scanner motor. / Check the scanner motor control PWB. (SIM 1-1) (Repair) Replace the scanner motor. / Replace the scanner motor control PWB. / Power Source-ON (After-work) Note Case 3 Trouble position/cause Scanner mechanism section trouble Remedy (Check) Check the scanner mechanism section. (Repair) "Repair the scanner mechanism section (scanner driver wire, drive pulley, etc.)." / Power Source-ON (After-work) Note Case 4 Trouble position/cause PCU MAIN PWB trouble Remedy (Check) (Repair) Replace the PCU MAIN PWB. / Power Source-ON (After-work) Re-enter setup values and adjustment values. (Install the EEPROM of the defective PCU MAIN PWB to a new PCU MAIN PWB.)

← Xem tất cả mã lỗi Sharp ARC280

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie