Code: H3-10
Description: Main heater lamp abnormally high temperature soft detection trouble
A/D value the fusing main heater lamp thermistor causes abnormally high temperature (over 230°C).
A/D value the fusing main heater lamp thermistor causes abnormally high temperature (over 230°C).
Causes: Main heater lamp thermistor defect Control PWB failure Fusing section connector contact failure
Remedy: Check the main heater lamp blinking with SIM 5-2-1. When the lamp blinks normally: Check the thermistor and the harness. Check the MCU PWB thermistor input circuit. If lamp lights and stays lit: Check the power PWB and the MCU PWB lamp control circuit. Clear the display of self-diagnostics with SIM 14.