Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H3-10 — Sharp ARM277

Code: H3-10

Description: Main heater lamp abnormally high temperature soft detection trouble
A/D value the fusing main heater lamp thermistor causes abnormally high temperature (over 230°C).
Causes: Main heater lamp thermistor defect Control PWB failure Fusing section connector contact failure
Remedy: Check the main heater lamp blinking with SIM 5-2-1. When the lamp blinks normally: Check the thermistor and the harness. Check the MCU PWB thermistor input circuit. If lamp lights and stays lit: Check the power PWB and the MCU PWB lamp control circuit. Clear the display of self-diagnostics with SIM 14.

← Xem tất cả mã lỗi Sharp ARM277

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie