Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi L4-06 — Sharp MX2300N

Code: L4-06

Description: Transfer belt separation position sensor trouble
When separating the primary transfer belt unit, change in the separation position sensor characteristics is not detected within the specified time.
Causes: Harness connection trouble between the PCU PWB and the separation position sensor The belt position sensor is not interrupted or it is always interrupted. Belt separation clutch operation trouble The primary transfer belt unit is not installed.
Remedy: Case 1 Cause Harness connection trouble between the PCU PWB and the separation position sensor Check and remedy Check the harness between the PCU PWB and the separation position sensor. Case 2 Cause The belt position sensor is not interrupted or it is always interrupted. Belt separation clutch operation trouble Check and remedy Use SIM6-3 to check the belt separation operation. Case 3 Cause The primary transfer belt unit is not installed. Check and remedy Install the primary transfer belt.

← Xem tất cả mã lỗi Sharp MX2300N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie