Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi L4-11 — Sharp MX2700N

Code: L4-11

Description: Shift motor trouble
When the shift motor is initialized, no characteristics change of the shifter home position sensor is not detected within the specified time.
Causes: Shift motor trouble Harness connection trouble between the PCU PWB and the shift motor, control circuit trouble When the finisher is installed with the finisher connector disconnected and when the finisher communication trouble occurs.
Remedy: Case 1 Cause Shift motor trouble Check and remedy Use SIM6-1 to check the operation of the shift motor. Case 2 Cause Harness connection trouble between the PCU PWB and the shift motor, control circuit trouble Check and remedy Use SIM30-1 to check the shifter home position sensor. Check the harness and the connector between the PCU PWB and the shift motor. Case 3 Cause When the finisher is installed with the finisher connector disconnected and when the finisher communication trouble occurs. Check and remedy Connect the finisher connector. When the communication trouble occurs between the PCU and the finisher, refer to the content of F1-00.

← Xem tất cả mã lỗi Sharp MX2700N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie