Code: H3-04
Description: Fusing section high temperature trouble (TH_US)
The temperature of the hung-up prevention thermistor exceeds the specified level.
The temperature of the hung-up prevention thermistor exceeds the specified level.
Causes: Non-contact thermistor trouble, control PWB trouble, fusing section connector connection error, AC power source trouble
Remedy: 1) Use Sim44-14 to check if the non-contact thermistor shows an abnormal temperature. If the display is normal, use Sim5-2 to check the blinking operation of the heater lamp. <1> If it blinks normally, check the thermistor and the harness. Check the control PWB thermistor input circuit section. <2> If the heater lamp keep lighting, check the AC PWB and the control PWB lamp control circuit. 2) Use SIM14 to cancel the trouble.