Code: C4-00
Description: PTC trouble (TC high pressure trouble)
Causes: PTC unit is not properly installed. Primary/Secondary transfer PWB trouble.. Primary/Secondary transfer unit is not installed properly. High pressure TC PWB trouble. PCU PWB trouble. Connector, harness connection trouble.
Remedy: Replace the PTC unit. Replace the secondary transfer PWB. Replace the secondary transfer unit. Replace the PCU PWB. Check connection of the connector and the harness. NOTE: When the PTC unit is broken down and repair cannot be made because of no replacement part: To use the machine continuously, make the setting to ignore the PTC trouble, and the machine can be operated tentatively. Set the engine soft SW8-3 in SIM55-1 to "1". This setting disables the PTC output, the heater control, and the error detection. After completion of repair, set the engine soft SW8-3 in SIM55-1 to "0".