Description: Finisher tray lift motor trouble (3K FIN)
Causes: Motor lock. Control PWB trouble. Disconnection of harness. Connector connection trouble. Area sensor trouble. Paper exit paper surface detection sensor trouble. Stapler safety switch trouble
Remedy: Use SIM3-3 to check the operation of the movable tray motor Check the harness and the connector connection from the control PWB to the motor and the sensor Replace the stacker control PWB Replace the movable tray motor Replace the following area sensors. - Loading tray upper limit sensor - Loading tray home position sensor - Loading tray full load sensor (Large coat paper full) - Loading tray middle sensor (Large size full load) - Loading tray lower limit sensor Small size full load) Replace the paper exit paper surface detection sensor 1 Replace the stapler safety switch Replace the harness from the control PWB to the motor and the sensor