Code: F1-34
Description: Finisher/punch motor trouble
When learning the punch unit, it does not complete normally and does not return to the home position. When executing punching, it does not shift from the home position in 0.2sec, or it overruns to go into non-HP state. When operating the punch unit, the encoder input cannot be detected within 0.1sec.
When learning the punch unit, it does not complete normally and does not return to the home position. When executing punching, it does not shift from the home position in 0.2sec, or it overruns to go into non-HP state. When operating the punch unit, the encoder input cannot be detected within 0.1sec.
Causes: Motor lock Motor RPM abnormality Overcurrent to the motor Finisher control PWB trouble
Remedy: Use SIM 3-3 to check the motor operation.