Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi F1-00 — Sharp MXM620U

Code: F1-00

Description: Finisher communication trouble
An error in the communication line test after turning on the power or canceling the simulation. Communication error with the finisher. Follows the communication protocol specifications. Communication error, timing abnormality of the communication data and the communication signal line
Causes: Improper connection or disconnection of the connector or harness between the machine and the finisher.
Finisher control PWB trouble. Control PWB (PCU) trouble.
Malfunction caused by noises
Remedy: Case 1 Cause Improper connection or disconnection of the connector or harness between the machine and the finisher. Check and remedy Check the connector and the harness in the communication line. Case 2 Cause Finisher control PWB trouble. Control PWB (PCU) trouble. Check and remedy Replace the finisher control PWB or the PCU PWB. Case 3 Cause Malfunction caused by noises Check and remedy Canceled by turning ON/ OFF the power.

← Xem tất cả mã lỗi Sharp MXM620U

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie