Code: F1-00
Description: Finisher communication trouble
An error in the communication line test after turning on the power or canceling the simulation. Communication error with the finisher. Follows the communication protocol specifications. Communication error, timing abnormality of the communication data and the communication signal line
An error in the communication line test after turning on the power or canceling the simulation. Communication error with the finisher. Follows the communication protocol specifications. Communication error, timing abnormality of the communication data and the communication signal line
Causes: Improper connection or disconnection of the connector or harness between the machine and the finisher.
Finisher control PWB trouble. Control PWB (PCU) trouble.
Malfunction caused by noises
Finisher control PWB trouble. Control PWB (PCU) trouble.
Malfunction caused by noises
Remedy: Case 1 Cause Improper connection or disconnection of the connector or harness between the machine and the finisher. Check and remedy Check the connector and the harness in the communication line. Case 2 Cause Finisher control PWB trouble. Control PWB (PCU) trouble. Check and remedy Replace the finisher control PWB or the PCU PWB. Case 3 Cause Malfunction caused by noises Check and remedy Canceled by turning ON/ OFF the power.