Code: L6-10
Description: Polygon motor lock detection
It is judged that the polygon motor lock signal of the LSU is not outputted. The polygon motor lock signal is checked in an interval of 10sec after starting the polygon motor, and it is found that the olygon motor is not rotating normally.
It is judged that the polygon motor lock signal of the LSU is not outputted. The polygon motor lock signal is checked in an interval of 10sec after starting the polygon motor, and it is found that the olygon motor is not rotating normally.
Causes: Polygon motor trouble
Disconnection or breakage of the LSU connector or the harness in the LSU
Disconnection or breakage of the LSU connector or the harness in the LSU
Remedy: Case 1 Cause Polygon motor trouble Check and remedy Use SIM 61-1 to check the polygon motor operation. Case 2 Cause Disconnection or breakage of the LSU connector or the harness in the LSU Check and remedy Check connection of the harness and the connector. Replace the LSU.