Description: Carriage unit connection with an incorrect model (support number : 5106) Memo : Remove the error in service mode when handling is completed.
Causes: The CARRIAGE UNIT for a different printer model is connected.
Remedy: 1 Check the items below. a) Connection of FLEXIBLE CABLE UNIT. (both MAIN PCB UNIT side and CARRIAGE RELAY PCB UNIT side) b) Check if the CARRIAGE RELAY PCB UNIT for different model has been installed.* * 12-color model and 8-color model adopt the same board. Proper connection and correct model. Go to 2. Improper connection or wrong model. a) Connect FLEXIBLE CABLE UNIT again. b) Install the proper CARRIAGE RELAY PCB UNIT model. 2 Replace the CARRIAGE UNIT. The problem is resolved Complete. The problem is not resolved Replace MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)