Description: Cutter blade unit error (support number : 4801)
Causes: • CUTTER HOME POSITION SENSOR cannot be detected. • Abnormal encoder value is detected when returning the cutter to the home position
Remedy: 1 Check the items below. a) Foreign substances on CUTTER BLADE UNIT. b) Check if the cutter (CT-07) is being attached slantwise. c) Perform [DIAGNOSIS > I/O DISPLAY] and check CUTTER HOME POSITION SENSOR operation. d) Check the harness connection. No foreign substance and proper condition Go to 2. Foreign substance is adhering or improper condition a) Remove the foreign substance. b) Reattach the cutter (CT-07). c) Replace CUTTER HOME POSITION SENSOR. d) Connect the harness. proper attachment improper attachment Attachment condition of the cutter (CT-07) 2 Replace CUTTER MOTOR UNIT, W/ENCODER. The problem is resolved Complete. The problem is not resolved Replace CUTTER BLADE UNIT.