Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi T2 — Xerox Phaser 1235

Code: T2

Display: T2-Fuser Lower Error
Description: A short fault in the lower fuser Thermistor was discovered. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, install a new fuser.
Remedy: 1. Remove and install the fuser. 2. Test the thermistors inside the fuser using the test described in “Switch scan test”. Replace the fuser. 4. Replace the low-voltage power supply. 5. Replace the engine controller board.

← Xem tất cả mã lỗi Xerox Phaser 1235

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie