Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U12 — Xerox Phaser 1235

Code: U12

Display: U12-Duplex I/F Error
Description: An error has been detected with the duplex module interface and communication path. Make sure the Auto Duplex Unit is properly installed.
Remedy: 1. Turn the printer off and on. 2. Pull out the duplexer and inspect its connector at the right front corner (the connector faces rearward). Inspect the printer’s corresponding connector on the printer chassis (covered by a flexible metal plate). 3. Inspect the wiring harness leading from the engine control board to the duplex unit connector. 4. Replace the duplex unit. 5. Replace the engine controller board.

← Xem tất cả mã lỗi Xerox Phaser 1235

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie