Code: U26, U27, U28, U29
Display: Un-Drum Error [U26-Yellow Drum Error] [U27-Magenta Drum Error] [U28-Cyan Drum Error] [U29-Black Drum Error]
Description: The imaging drum is either missing or requires reseating to be recognized by the printer. Turn off the printer, make sure the imaging drum is properly installed and turn on the printer. If the problem persists, install a new imaging drum.
Remedy: 1. Remove and install the drum unit. 2. Inspect the spring-loaded drum unit contacts (in a set of three). Ensure they are clean and move up and down freely. Remove the assembly and reseat it, if necessary. 3. Test the drum unit contacts using the Drum contact switch test listed in “Switch scan test”. Install a new drum unit. 5. Replace the engine controller board. 6. Replace the print unit chassis.