Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U10 — Xerox Phaser 2135

Code: U10

Display: U10-Roller Position Error
Description: An error has been detected with the pinch rollers not being in the expected position. Turn off the printer, wait 15 seconds, then turn on the printer.
Remedy: 1. Ensure the correct weight and type of paper is loaded in the currently used tray. Also ensure the paper is loaded correctly in the tray. 2. Clean the pick and registration rollers. 3. Ensure there are no obstructions in the paper path. 4. Test the registration motor and clutch as described in “Motor and clutch tests” on page 69. Replace the motor or clutch if necessary. 5. Inspect the wiring for the registration clutch and registration motor. 6. Replace the engine controller board.

← Xem tất cả mã lỗi Xerox Phaser 2135

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie