Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi W16 — Xerox Phaser 2135

Code: W16

Display: Fuse Cut Error
Description: For the new Customer Replaceable Consumable (imaging drums, transfer belt or fuser) just installed, the printer did not detect the CRC’s “new/used” fuse blow. An internal fuse of a new CRC ordinarily blows a few seconds after the CRC is installed. If the fuse cannot be blown, then the consumable’s counter can't be reset and the “consumable expired / replace” messages will not go away.
Remedy: 1. Remove the CRC. 2. Cycle the printer’s power. 3. Install the CRC again. If the error still occurs, try a different CRC. 4. If error reoccurs with a different CRC, replace the engine controller board. 5. Replace the print unit chassis.

← Xem tất cả mã lỗi Xerox Phaser 2135

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie