Code: 06-100, 06-200
Description: Laser Module (LSU) Motor Fault The machine has detected that the Laser Module Drive Motor is not working correctly.
Remedy: Enter Diagnostic (EDC) Mode. Select: [DC330 Component Control, 110 LSU, LSU Mot1 Run] to test the LSU motor. The motor runs. Check the Main Wire Harness and connectors on the Laser Module . The connections are secure. Disconnect and securely reconnect the harness. Check the harness for a short circuit or open circuit. The harness is OK. Replace the harness. Replace the Laser Module Go to SCP 04 Final Actions.