Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 07-130 — Xerox Phaser 3260

Code: 07-130

Description: Paper Jam in Tray 1 Fault A paper jam has occurred in Tray 1.
Remedy: Remove Tray 1 and ensure that guides are set correctly. The paper is loaded correctly in the tray. Align the paper in Tray 1 then reinsert the tray. Check the position of the jammed sheet. The lead edge reached the Retard Roll. (Figure 1.) Enter Diagnostic (EDC) Mode. Select: [DC330 Component Control, 102-Sensor, Feed Sens] to block and clear the Feed Sensor. The sensor is OK. Replace the Feed Sensor. In Diagnostics, go to [101-Clutch, Tray 1 Pick up] to energize the clutch. The clutch engages. Replace the Tray 1 Pick up (Feed) Clutch. Perform SCP Final Actions. Remove any jammed paper. Check the following for wear or damage and replace as required: • Retard Roller • Pick up (Feed) and Forward Roll Assembly • Elevator Plate • Elevator Plate Springs

← Xem tất cả mã lỗi Xerox Phaser 3260

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie