Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10-100 — Xerox Phaser 3260

Code: 10-100

Description: Fuser Temperature (Open) Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.)
Remedy: Power Off the machine and check that the Fuser connection is fully seated . The Fuser connections are OK. Firmly reconnect the Fuser assembly. Switch the power ON. Check for +3.3 VDC to the Thermistor at P/J on Main PWB. The voltage is OK. • Check the wire harness for open or short circuits. • Replace the Main PWB , Check the voltage to the Over Heat Thermostat. The voltage is OK. • Check for AC line voltage to the LVPS PWB . • Check the wire harness for open or short circuits. • Replace the LVPS PWB if needed. Check the Heat Lamp for an open circuit. Repair or replace the Fuser Assembly as required.

← Xem tất cả mã lỗi Xerox Phaser 3260

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie