Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-317, 010-397 — Xerox Phaser 3610

Code: 010-317, 010-397

Description: 010-317 FUSING ASSEMBLY Detached 010-397 FUSING ASSEMBLY Failure 010-317: FUSING ASSEMBLY detached is detected. 010-397: The operation error of FUSING ASSEMBLY (Temperature anomaly error etc.) is detected.
Remedy: 1 Check the installation of the FUSING ASSEMBLY. • Is the Drawer Connector between the FUSING ASSEMBLY and the Main unit free of broken/bent pins, foreign substances, burns, and etc., and is the unit installed properly? • Make sure that the FUSING ASSEMBLY has cooled down before performing the operation. Go to Step 2. Reinstall the FUSING ASSEMBLY 2 Check the connection between the FUSING ASSEMBLY and the MCU PWB, FUSING ASSEMBLY and the LVPS, as well as between the LVPS PWB - MCU PWB. • Are the FUSER HARNESS ASSEMBLY and the LVPS HARNESS ASSEMBLY connected securely? Go to Step 3. Securely connect the Fuser HARNESS ASSEMBLY and the LVPS HARNESS ASSEMBLY 3 • Replace the FUSER HARNESS ASSEMBLY. • Does an error occur? Go to Step 4. Troubleshooting complete. 4 • Replace the LVPS HARNESS ASSEMBLY. • Does an error occur? Go to Step 5. Troubleshooting complete. 5 • Replace (Fusing Assembly). Does an error occur? Go to Step 6. Troubleshooting complete. 6 • Replace (LVPS.) • Does an error occur? Replace (MCU PWB) Troubleshooting complete.

← Xem tất cả mã lỗi Xerox Phaser 3610

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie