Description: Tray Configure Error Cause: Tray configuration error was detected. (including all of the wrong configurations)
Remedy: 1 • Does the Tray configuration suit the specification? Go to Step 2. Change the Tray configuration related to the specification 2 • Check the connections between the OPTIONAL TRAY PWB ASSEMBLY and the MCU PWB, as well as between the OPTIONAL TRAY PWB ASSEMBLY and the LVPS PWB. • Are the OPTIONAL FEEDER HARNESS ASSEMBLY (P/J213P/J243, P/J24P/J243) and the FEEDER HARNESS ASSEMBLY DRAWER 1 (P/J243P/J419) connected securely? Go to Step 3. Securely connect the OPTIONAL FEEDER HARNESS ASSEMBLY and the FEEDER HARNESS ASSEMBLY DRAWER 1 3 • Replace the OPTIONAL FEEDER HARNESS ASSEMBLY. • Does an error occur? Go to Step 4. Troubleshooting complete. 4 • Replace the FEEDER HARNESS ASSEMBLY DRAWER 1. • Does an error occur? Go to Step 5. Troubleshooting complete. 5 • Check the connection between the OPTIONAL TRAY PWB ASSEMBLY (Upper) and the OPTIONAL TRAY PWB ASSEMBLY (Lower). Are the FEEDER HARNESS ASSEMBLY DRAWER 2 (P/J423 - P/J4231) and the FEEDER HARNESS ASSEMBLY DRAWER 1 (P/J4231 - P/J419) connected securely? Go to Step 6. Securely connect the FEEDER HARNESS ASSEMBLY DRAWER 2 and the FEEDER HARNESS ASSEMBLY DRAWER 1 6 • Replace the FEEDER HARNESS ASSEMBLY DRAWER 2. • Does an error occur? Go to Step 7. Troubleshooting complete. 7 • Replace the FEEDER HARNESS ASSEMBLY DRAWER 1. • Does an error occur? Go to Step 8. Troubleshooting complete. 8 • Replace (Optional Tray PWB Assembly) • Does an error occur? Go to Step 9. Troubleshooting complete. 9 • Replace (Feeder Assembly). • Does an error occur? Replace (MCU PWB) Troubleshooting complete.