Code: 01-900-00
Description: Mailbox Rear Door
Causes: Open. The Mailbox Rear Door is not latched securely.
Remedy: • Close the Mailbox Rear Door. • Check for obstructions blocking the interlock switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Check the Mailbox Rear Door interlock actuator. The actuator is undamaged. Y↓ N→Repair or replace the Mailbox rear door. Select dC330 code 12-915. The switch is operational (high/low). Y↓ N→Replace the Mailbox Rear Door Interlock Switch. Remove the Mailbox top cover and check the Rear Door Interlock Switch (PL 11.30 Item 4). The switch connections are secure. Y↓ N→Secure the Mailbox Rear Door Interlock Switch connections. Check the Mailbox option harness in the Mailbox right cover. The harness is undamaged. Y↓ N→Repair or replace the Mailbox option harness, PL 11.15 Item 4. Replace these components in order until the error is corrected. 1. Mailbox Rear Door Interlock Switch, PL 11.30 Item 4 2. Mailbox Control Board, PL 11.15 Item 1 3. IOT Upper Option Harness, PL 10.30 Item 24 4. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Check the Mailbox Rear Door interlock actuator. The actuator is undamaged. Y↓ N→Repair or replace the Mailbox rear door. Select dC330 code 12-915. The switch is operational (high/low). Y↓ N→Replace the Mailbox Rear Door Interlock Switch. Remove the Mailbox top cover and check the Rear Door Interlock Switch (PL 11.30 Item 4). The switch connections are secure. Y↓ N→Secure the Mailbox Rear Door Interlock Switch connections. Check the Mailbox option harness in the Mailbox right cover. The harness is undamaged. Y↓ N→Repair or replace the Mailbox option harness, PL 11.15 Item 4. Replace these components in order until the error is corrected. 1. Mailbox Rear Door Interlock Switch, PL 11.30 Item 4 2. Mailbox Control Board, PL 11.15 Item 1 3. IOT Upper Option Harness, PL 10.30 Item 24 4. MCU Board, PL 3.10 Item 3