Code: 03-410-00
Description: Tray 2 Paper Mismatch
Causes: Media size setting for Tray 2 differs from the media size reported by the Tray 2 Size Switch.
Remedy: • Check media size settings for the tray from the Control Panel. • Reset the tray side and rear guides. • Check for obstructions blocking the Size Switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Remove Tray 2 and inspect the Size Switch. The Size Switch is undamaged. Y↓ N→Replace the Size Switch. Inspect the Tray 2 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-220, 07-230, 07-240. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Remove Tray 2 and inspect the Size Switch. The Size Switch is undamaged. Y↓ N→Replace the Size Switch. Inspect the Tray 2 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-220, 07-230, 07-240. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. MCU Board, PL 3.10 Item 3