Code: 03-440-00
Description: Tray 5 Paper Mismatch RAP
Causes: 03-440-00 Media size setting for Tray 5 differ from those reported by the Size Switch.
Remedy: • Check media size settings for the tray from the Control Panel. • Reset the tray side and rear guides. • Check for obstructions blocking the Size Switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Inspect the Tray 5 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-520, 07-530, 07-540. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Remove the IOT, Tray 3 and Tray 4 from the Feeder. Check the Tray 5 Upper Option Harness. The harness is undamaged. Y↓ N→Replace the Upper Option Harness. Check option harness continuity through all trays. The harnesses are undamaged. Y↓ N→Replace damaged harnesses. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. Feeder Board, PL 8.30 Item 7 4. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Inspect the Tray 5 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-520, 07-530, 07-540. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Remove the IOT, Tray 3 and Tray 4 from the Feeder. Check the Tray 5 Upper Option Harness. The harness is undamaged. Y↓ N→Replace the Upper Option Harness. Check option harness continuity through all trays. The harnesses are undamaged. Y↓ N→Replace damaged harnesses. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. Feeder Board, PL 8.30 Item 7 4. MCU Board, PL 3.10 Item 3