Code: 03-470-00
Description: Tray 6 Paper Mismatch
Causes: Media size setting for Tray 6 differ from those reported by the Size Switch.
Remedy: • Check media size settings for the tray from the Control Panel. • Reset the tray side and rear guides. • Check for obstructions blocking the Size Switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Inspect the Tray 6 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-620, 07-630, 07-640. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Remove the IOT, Tray 3, 4 and 5 from the Feeder. Check the Tray 6 Upper Option Harness. The harness is undamaged. Y↓ N→Replace the Upper Option Harness. Check option harness continuity through all trays. The harnesses are undamaged. Y↓ N→Replace damaged harnesses. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. Feeder Board, PL 8.30 Item 7 4. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Inspect the Tray 6 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-620, 07-630, 07-640. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Remove the IOT, Tray 3, 4 and 5 from the Feeder. Check the Tray 6 Upper Option Harness. The harness is undamaged. Y↓ N→Replace the Upper Option Harness. Check option harness continuity through all trays. The harnesses are undamaged. Y↓ N→Replace damaged harnesses. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. Feeder Board, PL 8.30 Item 7 4. MCU Board, PL 3.10 Item 3