Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 04-730-00 — Xerox Phaser 4600

Code: 04-730-00

Description: HCF Lift Error
Causes: HCF Level Sensor did not change state within 13 seconds of Lift Motor activation. NOTE: Optional Tray numbering varies by configuration. When testing HCF components, use the dC330 codes appropriate for the HCF’s position. For example, if the configuration is 5 trays and the 5th tray is the HCF, use Tray 5 control codes.
Remedy: • Open and close the HCF Front Door. • Check for obstructions blocking bottom plate movement.
Cycle system power. The error message is displayed. Y↓ N→Complete. Raise and lower the lower lift plate. The lower lift plate moves up and down smoothly. Y↓ N→Repair or replace damaged components. Check Pick Assembly (PL 8.25) motion. Pick assembly motion is good. Y↓ N→Repair improper Pick Assembly motion. Select dC330 code for the HCF position. The sensor is operational (high/low). Y↓ N→Repair or replace the Level Sensor. Check the Lift Gear, PL 8.35 Item 4. The gear is undamaged and properly installed. Y↓ N→Replace the Lift Gear. Test HCF Lift Motor operation by opening and closing the front door. The Lift Motor rotates. Y↓ N→Remove the IOT, Tray 3 and Tray 4 from the HCF and check the HCF Option Harness, PL 7.25 Item 15. The harness is undamaged. Y↓ N→Replace the harness (). Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Remove the Right Cover (), reseat CN2 on the Control Board and CN1, CN2 on the Jumper Board, then retest. The Lift Motor rotates. Y↓ N→Replace the Lift Motor, (), then retest. The Lift Motor rotates. Y↓ N→Replace the Control Board, (). Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Feeder Assembly, PL 8.25 Item 16 2. Control Board, PL 7.25 Item 18 3. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie