Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 07-120-00 — Xerox Phaser 4600

Code: 07-120-00

Description: Tray 2 is Open
Causes: The Size Switch indicates the Tray is not fully installed.
Remedy: 1. Close the Tray. 2. Check the Size Switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Remove Tray 2 and inspect the Size Switch. The Size Switch is undamaged. Y↓ N→Replace the Size Switch, then retest. Select dC330 code 07-200 to test the switch. The switch signals change (open/closed). Y↓ N→Remove the Right Cover and reseat CN11 on the MCU Board, then retest. The sensor signal changes. Y↓ N→Replace the MCU Board. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie