Code: 07-320-00
Description: Tray 4 is Open
Causes: The Tray 4 Size Switch indicates Tray 4 is open.
Remedy: 1. Close the Tray. 2. Check the Size Switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Remove Tray 4 and inspect the Size Switch. The Size Switch is undamaged. Y↓ N→Replace the Size Switch, then retest. Select dC330 code 07-400 to test the switch. The switch signal changes (open/closed). Y↓ N→Remove the Right Cover and reseat CN5 on the Feeder Board, then retest. The sensor signal changes. Y↓ N→Replace the Feeder Board. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Size Switch, PL 8.30 Item 9 2. Feeder Board, PL 8.30 Item 7 3. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Remove Tray 4 and inspect the Size Switch. The Size Switch is undamaged. Y↓ N→Replace the Size Switch, then retest. Select dC330 code 07-400 to test the switch. The switch signal changes (open/closed). Y↓ N→Remove the Right Cover and reseat CN5 on the Feeder Board, then retest. The sensor signal changes. Y↓ N→Replace the Feeder Board. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Size Switch, PL 8.30 Item 9 2. Feeder Board, PL 8.30 Item 7 3. MCU Board, PL 3.10 Item 3