Code: 07-410-00
Description: Paper Empty at Tray 5
Causes: The No Paper Sensor indicates Tray 5 is empty.
Remedy: 1. Check the No Paper Sensor Actuator. 2. Check for obstruction of the Pick mechanism.
Check the No Paper Sensor Actuator. The actuator is undamaged and motion is good. Y↓ N→Repair or replace the Tray 5 No Paper Sensor Actuator. Select dC330 code 07-510 to test the sensor. The sensor signal changes (high/low). Y↓ N→Remove the IOT, Tray 3 and Tray 4. Check the option harness connections. The harness connectors are undamaged. Y↓ N→Replace any damaged harnesses. Reassemble the system to exchange Feeder positions. The error changes to the new feeder position. Y↓ N→Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace the MCU Board. Replace the No Paper Sensor , then retest. The signal changes. Y↓ N→Remove the Right Cover and reseat CN3 on the Feeder Board, then retest. The sensor signal changes. Y↓ N→Replace the Feeder Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.
Check the No Paper Sensor Actuator. The actuator is undamaged and motion is good. Y↓ N→Repair or replace the Tray 5 No Paper Sensor Actuator. Select dC330 code 07-510 to test the sensor. The sensor signal changes (high/low). Y↓ N→Remove the IOT, Tray 3 and Tray 4. Check the option harness connections. The harness connectors are undamaged. Y↓ N→Replace any damaged harnesses. Reassemble the system to exchange Feeder positions. The error changes to the new feeder position. Y↓ N→Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace the MCU Board. Replace the No Paper Sensor , then retest. The signal changes. Y↓ N→Remove the Right Cover and reseat CN3 on the Feeder Board, then retest. The sensor signal changes. Y↓ N→Replace the Feeder Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.