Code: 08-100-00
Description: Jam 1 in Registration
Causes: Media remains in the Registration Rollers.
Remedy: • Check the media. • Check Toner and Drum Cartridge installation. • Check for obstructions blocking the media path.
Check the Registration Rollers for excessive wear, poor spring tension or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the Registration Roller Assembly. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 08-850 to test the Registration Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN5 and P/J36, then retest. The clutch is engaged. Y↓ N→Replace the Registration Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-920 to test the Feed Drive. The Feed Drive Assembly rotates (on/ off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Registration Roller Assembly, PL 8.45 Item 12 2. Registration Clutch, PL 4.10 Item 7
Check the Registration Rollers for excessive wear, poor spring tension or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the Registration Roller Assembly. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 08-850 to test the Registration Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN5 and P/J36, then retest. The clutch is engaged. Y↓ N→Replace the Registration Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-920 to test the Feed Drive. The Feed Drive Assembly rotates (on/ off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Registration Roller Assembly, PL 8.45 Item 12 2. Registration Clutch, PL 4.10 Item 7