Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08-600-00 — Xerox Phaser 4600

Code: 08-600-00

Description: Jam 0 in Duplex Unit
Causes: Media jam at the rear of the Duplex Unit.
Remedy: 1. Check media condition. 2. Check the Rear Door latch. 3. Check for obstructions in the media path.
Check the Duplex Unit transport components for damage or excessive wear. The rollers are undamaged and clean. Y↓ N→Clean or replace the Duplex Unit, PL 10.25 Item 26. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Check the Fuser thumbscrews. The Fuser thumbscrews are tight. Y↓ N→Tighten the thumbscrews Check the condition of the Duplex Unit Timing Belt, PL 10.25 Item 11. The belt is undamaged. Y↓ N→Replace the Timing Belt. Check the exit gate and duplex roller. The exit gate and duplex roller move freely. Y↓ N→Replace the Exit Assembly. Select dC330 code 04-230 to test the Duplex Drive Assembly. The Duplex Drive Assembly rotates (on/off). Y↓ N→Remove the Right Cover and reseat CN11 on the MCU Board, then retest. The Duplex Drive Assembly rotates. Y↓ N→Replace the Duplex Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 4600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie