Code: 09-210-00, 09-270-00
Description: Toner (ADC) Sensor Error
Causes: 09-210-00 ADC Sensor error. 09-270-00 ADC Sensor communications errors or failure.
Remedy: • Cycle system power. • Check for obstructions, debris, or accumulations of toner blocking the ADC Sensor and shutter. • Check Toner Cartridge life count. • Check Drum Cartridge life count.
Check the ADC Sensor shutter. Shutter motion is unobstructed. Y↓ N→Clear the obstructions or repair the damage. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the ADC Sensor. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Remove the Right Cover and reseat CN15 on the MCU Board. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the MCU Board. Replace the ADC Sensor. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Test Drum Cartridge bias voltages. Bias voltage are within specifications. Y↓ N→Replace the HVPS. Replace these components in order until the error is corrected. 1. Toner Cartridge 2. Drum Cartridge, PL 9.10 Item 1 3. MCU Board, PL 3.10 Item 3
Check the ADC Sensor shutter. Shutter motion is unobstructed. Y↓ N→Clear the obstructions or repair the damage. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the ADC Sensor. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Remove the Right Cover and reseat CN15 on the MCU Board. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the MCU Board. Replace the ADC Sensor. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Test Drum Cartridge bias voltages. Bias voltage are within specifications. Y↓ N→Replace the HVPS. Replace these components in order until the error is corrected. 1. Toner Cartridge 2. Drum Cartridge, PL 9.10 Item 1 3. MCU Board, PL 3.10 Item 3