Code: 09-240-00
Description: Toner Cartridge Communications Error
Causes: Fail to communicate with the Toner Cartridge CRUM. NOTE: Messages are different based on the Toner Fault Count.
Remedy: • Cycle system power. • Replace the Toner Cartridge.
Check the Toner Cartridge CRUM connection. The connection is clean and undamaged. Y↓ N→Cycle system power. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the Toner Cartridge. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Remove the Right Cover and reseat CN2 on the MCU Board. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the MCU Board. Remove the Left Cover and check the toner CRUM harness. The harness is connected and undamaged. Y↓ N→Repair or reconnect the harness. Replace these components in order until the error is corrected. 1. Joint Board, PL 9.15 Item 7 2. MCU Board, PL 3.10 Item 3
Check the Toner Cartridge CRUM connection. The connection is clean and undamaged. Y↓ N→Cycle system power. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the Toner Cartridge. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Remove the Right Cover and reseat CN2 on the MCU Board. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the MCU Board. Remove the Left Cover and check the toner CRUM harness. The harness is connected and undamaged. Y↓ N→Repair or reconnect the harness. Replace these components in order until the error is corrected. 1. Joint Board, PL 9.15 Item 7 2. MCU Board, PL 3.10 Item 3