Causes: Automated image quality routine in progress. The printer idles and adjusts process parameters until they fall within established setpoints. Listed are situations where the status message is displayed: • Toner density adjustments (ADC) • Toner mixing at warm-up or ready • Toner supply at warm-up or ready • Adjust internal temperature • Adjust fusing temperature These messages can appear as media type changes while fusing temperature is adjusted to the new media type.
Remedy: • Cycle system power. • Allow the automatic process to complete. If the printer is unsuccessful in automatically adjusting image quality, an error appears indicating the problem. Use the information above to isolate the problem.